The Model 742DP is a new generation of laser spot tracker module with wide flexibility for missile and platform tracker applications. The detector is temperature controlled and optimized for 1.06µm. Independent five channel noise detectors set the lowest thresholds to achieve long acquisition ranges for different background light and spot positions and special circuits resist sunlight blinding in any one or all quadrants. A range of N-type custom-designed detectors gives the highest performance at 1.06µm. A separate substrate allows the detector size or type to be optimized for your application. Model 742DP comprises a hermetically-sealed temperature-controlled detector with built-in front-end electronics, mounted on a SMT board. A second printed board contains analog and digital processing circuits. The individual channels are digitized with a high-speed A-D converter and output as a serial digital interface for steering. An adaptive threshold control allows optimum signal-to-noise operation and power management is used to reduce power consumption.
The 742DP Emulator is a test fixture designed to assist the evaluation and development of products that incorporate an AMI quadrant laser spot tracker Model 742DP and custom variants.
Data Sheets (PDF Format) are available for models listed below.
|Model||Detector||Detector Ø||Wavelength||Responsivity||Typical Pulsewidth||Dynamic Range||Supply Voltage|
|742DP||Si PIN||5.33 mm to 14 mm||Optimized for 1.06 µm||150 to 450 nW||20 ns||> 100,000:1||±5 VDC|
|743DP||Si APD||1.5 mm||Optimized for 1.06 µm||<50 nW||20 ns||> 100,000:1||±5 VDC|
Application Notes available for most models. Please contact us to request a copy of these ITAR controlled documents.
Specifications are subject to change without notice.
In the event these commodities will be transferred to a “foreign person” as defined in 22 CFR 120.16,either outside or within the United States, a validated US State Department license is required.