Technical Library


Technical Articles

1 MV/A Transimpendance Amplifier

Model 312B Current Amplifier Application Note AMI’s Model 312B is a low noise high gain (1MV/A) transimpedance amplifier.  It is designed to amplify small current signals, typically produced by a photodiode, to a voltage signal employing AMI’s proprietary compensation scheme

Posted in Sensors and Amplifiers, Technical Note

HIGH SENSITIVITY APD OPTICAL RECEIVER APPLICATION NOTES

MODEL 7511A HIGH SENSITIVITY APD OPTICAL RECEIVER APPLICATION NOTE INTRODUCTION The Model 7511A is a high gain, low noise optical receiver employing an avalanche photodiode (APD) with a nominal bandwidth of 35 MHz and high dynamic range capable of driving a

Posted in Sensors and Amplifiers, Technical Note

60 W, 500 mA Flashlamp Simmer Supply

Model 864A Flashlamp Simmer Supply The Model 864A Simmer Supply is designed to strike and maintain a low-level current discharge in flashlamps.  Initially, the simmer output open circuit voltage rises to a stabilized 1500 V.  The simmer trigger output provides

Posted in General News, Laser Electronics, Technical Note

New High Sensitivity APD Optical Receiver, Model 7511A

Longwood, FL – October 21, 2019. Analog Modules, Inc. (AMI), a HEICO company (NYSE:HEI.A) (NYSE:HEI), is pleased to announce the release of its High Sensitivity InGaAs APD Optical Receiver, Model 7511A-1-04. The Model 7511A-1-04 optical receiver includes a 200 µm

Posted in General News, Sensors and Amplifiers

AMI Exhibiting at BiOS and Photonics West 2019

A new year brings a new show season to AMI with upcoming exhibits in San Francisco, Shanghai, Baltimore and Munich. First up is BiOS February 2-3 at the Moscone Center in San Francisco, CA. Part of the Photonics West conference

Posted in General News, Laser Electronics, Sensors and Amplifiers

DC Coupled Fiber Optic Link

AMI’s Model 732T/R offers a unique capability as truly DC coupled fiber optic link. The Model 732T/R includes a matched transmitter and receiver pair providing the end user with a DC coupled fiber optic link. It can be modulated with a

Posted in Sensors and Amplifiers, Technical Note

A New Generation of Laser Spot Tracker

The Model 742DP is a new generation of Laser Spot Tracker with wide flexibility for missile and platform tracker applications. The detector is temperature controlled and optimized for 1.06μm. Independent five channel noise detectors set the lowest thresholds to achieve

Posted in General News, Sensors and Amplifiers, Technical Note

WHY CHOOSE AMI FOR YOUR LASER RANGE RECEIVER OR SPOT TRACKER?

AMI is the Dominant independent supplier of laser receivers worldwide. AMI has the advantage of 35 years of field and user feedback, and has continuously improved its products to reflect real life situations and use, including battlefield experience. As an

Posted in Sensors and Amplifiers, Technical Note

New Stackable CW & Pulsed Laser Diode Driver

Longwood, FL – December 11, 2017. Analog Modules, Inc. is pleased to announce the release of its Stackable CW & Pulsed Laser Diode Driver, Model 787. The Model 787 OEM laser diode driver is a highly efficient, current regulated, low

Posted in Uncategorized

Gary A. Sweezey and Timothy M. Ayres have been promoted to Co-Presidents

Analog Modules Inc. (“AMI”), a subsidiary of HEICO Corporation Electronic Technologies Group (NYSE:HEI.A) (NYSE:HEI), announces that Gary A. Sweezey and Timothy M. Ayres have been promoted to Co-Presidents of the organization. Ian D. Crawford, the former President of AMI, will

Posted in General News

Featured Products

Model 766

The Model 766 Pulsed Laser Diode Driver offers user-adjustable pulse width capability as low as 150ps up to 1ns for driving laser diode modules at output currents up to 1.1A. The driver circuitry includes a TEC controller and operates from a single 5V power source.