Design work continues on AMI’s new capacitor charging power supply. The new supply will feature active power factor correction, universal input and full compliance with medical safety standards. Modern components and manufacturing techniques will be used to provide the reliability…
sales@analogmodules.com | 
1-407-339-4355
OEM Electronics for laser welding and cutting
Models 762 and 766 Improved Performance, Up to 10.0 V
The maximum compliance voltage of the Models 762 and 766 Seed Laser Diode Drivers has increased to 10 V. AMI’s Model 762 OEM programmable seed laser diode drivers are ideal for driving 14-pin butterfly packaged laser diode modules for use…
Posted in General News, Laser Electronics, Technical Note Tagged with: fiber laser, Laser Diode Driver, seed laser
AMI’s 40th Anniversary!
Longwood, FL – September 9, 2020. Analog Modules, Inc. is pleased to celebrate the 40th Anniversary of its incorporation on this date in 1980. AMI’s founder Ian Crawford, originally from Edinburgh, Scotland, had been designing laser-based systems for Ferranti when…
What’s Next From AMI
Redesigned Models 314B and 714B The prototyping stage for the Models 314B and 714B is complete. They will be ready for release to production soon offering DC to 500 MHz bandwidth, 6.5 pA/√Hz noise performance with up to 10 kV/A gain.…
Posted in General News
Redesign Project: Variable Pulse Width Flashlamp Controller
AMI’s Model 8800 series of flashlamp and laser diode controllers have been a fixture in laser laboratories around the world for >25 years. These microprocessor controlled systems were preceded by the rotary switch and dial controlled Models 883 and 884…
Capacitor Charging Power Supplies
Two Designs for Fixed and Variable Pulse Width Applications AMI offers two capacitor charging power supply designs. The Model 5703A is designed for charging deep cycling capacitors typical of fixed pulse width SCR switched systems. The Model 5704A is designed…
Posted in Laser Electronics, Technical Note
Model 312B Low Noise, GaAs FET Transimpedance Amplifier
The 312B Series are ultra low noise, high gain, GaAs FET amplifiers designed for low level current source input applications in which high gain is required. ULTRA LOW NOISE – DOWN TO 1 pA/√Hz HIGH GAIN – 1 MV/A BANDWIDTH…
Posted in Sensors and Amplifiers, Technical Note
HV Detector Bias Supplies
High Voltage APD Photodetector Bias Supplies In order to achieve the optimum performance from a photodetector, the high voltage bias supply must not induce switching noise into the system. AMI offers a line of High Voltage Power Supplies for photodetector…
Posted in Sensors and Amplifiers, Technical Note
Model 762 Seed Laser Diode Driver GUI Graphical User Interface
AMI’s Model 762 Seed Laser Diode Driver offers output currents up to 2.5 A for CW and Pulsed operation of 14-pin butterfly lasers with a Type I pin configuration. Included with the Model 762 is a Graphical User Interface (GUI)…
Posted in Uncategorized
Model 755A-04.1
Hybrid eyesafe laser rangefinder receiver is designed for laser rangefinding & surveying equipment. Compact construction is ideal for miniature applications. Fast recovery from To overload allows ranging to close objects without compromising long range performance. The incorporation of an InGaAs APD gives very high sensitivity with time programmed gain to minimize false targets. Operation at both 1.06 µm and 1.54 µm is possible over a wide range of pulse widths.
