Two Designs for Fixed and Variable Pulse Width Applications AMI offers two capacitor charging power supply designs. The Model 5703A is designed for charging deep cycling capacitors typical of fixed pulse width SCR switched systems. The Model 5704A is designed…
sales@analogmodules.com | 
1-407-339-4355
OEM Electronics for laser welding and cutting
Model 312B Low Noise, GaAs FET Transimpedance Amplifier
The 312B Series are ultra low noise, high gain, GaAs FET amplifiers designed for low level current source input applications in which high gain is required. ULTRA LOW NOISE – DOWN TO 1 pA/√Hz HIGH GAIN – 1 MV/A BANDWIDTH…
Posted in Sensors and Amplifiers, Technical Note
HV Detector Bias Supplies
High Voltage APD Photodetector Bias Supplies In order to achieve the optimum performance from a photodetector, the high voltage bias supply must not induce switching noise into the system. AMI offers a line of High Voltage Power Supplies for photodetector…
Posted in Sensors and Amplifiers, Technical Note
Model 762 Seed Laser Diode Driver GUI Graphical User Interface
AMI’s Model 762 Seed Laser Diode Driver offers output currents up to 2.5 A for CW and Pulsed operation of 14-pin butterfly lasers with a Type I pin configuration. Included with the Model 762 is a Graphical User Interface (GUI)…
Posted in Uncategorized
ULTRA LOW RIPPLE CW & PULSED LASER DIODE DRIVER, Model 785A
AMI’s Model 785A is a versatile laser diode driver for driving high power laser diodes in both pulsed and CW applications at up to 20 A, 26 V. In addition to the extremely low noise and ripple performance the 785A…
Posted in Laser Electronics, Technical Note
New High Performance Hybrid Eyesafe Laser Rangefinder Receiver
Analog Modules, Inc. announces the release of its High Performance Hybrid Eyesafe Laser Rangefinder Receiver Longwood, FL – June 4, 2020. Analog Modules, Inc. is pleased to announce the release of its High-Performance Hybrid Eyesafe Laser Rangefinder Receiver, Model 758B.1.…
Posted in General News, Sensors and Amplifiers
Burst Mode Laser Diode or Flashlamp Operation
AMI’s Models 8800D and 8800V can be programmed to output a string of pulses. From the Model 8800D & 8800V Manuals: Burst mode is a batch command. This instructs the microprocessor to run a burst or to trigger the output…
AMI Series of Rangefinder Receivers with Processors
The 7558A and 7555 Series Rangefinder/Processor assemblies comprise a high performance Model 758A or 755A receiver with compact support electronics to provide corrected range data to a mother system. The serial range data output is calibrated using AMI’s patented technology…
Posted in Uncategorized
Variable Pulse Width Systems Design Elements
Variable pulse width systems, sometimes called electronic pulse forming networks, are fairly flexible. They can accommodate a variety of lamps and operating conditions. The system has to be designed to sustain the maximum anticipated operating conditions driving both cost and…
Posted in Laser Electronics, Technical Note
Dual Output Differential High Voltage Power Supply
New Model 533 Differential Output ±1 kV Power Supply The Model 533 is a highly efficient, cost effective, voltage regulated, differential high voltage power supply capable of providing up to ±1,000 V at up to 125 W total output power. A…
Model 755A-04.1
Hybrid eyesafe laser rangefinder receiver is designed for laser rangefinding & surveying equipment. Compact construction is ideal for miniature applications. Fast recovery from To overload allows ranging to close objects without compromising long range performance. The incorporation of an InGaAs APD gives very high sensitivity with time programmed gain to minimize false targets. Operation at both 1.06 µm and 1.54 µm is possible over a wide range of pulse widths.
