Model 7511B-1-04 High Sensitivity APD Optical Receiver This week AMI released a revised data sheet for the Model 7511B-1-04 our high gain, low noise, APD-preamp, optical receiver. The compact construction and PCB mounting capability make the Model 7511B-1-04 ideal for…
sales@analogmodules.com | 
1-407-339-4355
OEM Electronics for laser welding and cutting
Blog Archives
AMI’s 40th Anniversary!
Longwood, FL – September 9, 2020. Analog Modules, Inc. is pleased to celebrate the 40th Anniversary of its incorporation on this date in 1980. AMI’s founder Ian Crawford, originally from Edinburgh, Scotland, had been designing laser-based systems for Ferranti when…
Model 312B Low Noise, GaAs FET Transimpedance Amplifier
The 312B Series are ultra low noise, high gain, GaAs FET amplifiers designed for low level current source input applications in which high gain is required. ULTRA LOW NOISE – DOWN TO 1 pA/√Hz HIGH GAIN – 1 MV/A BANDWIDTH…
Posted in Sensors and Amplifiers, Technical Note
HV Detector Bias Supplies
High Voltage APD Photodetector Bias Supplies In order to achieve the optimum performance from a photodetector, the high voltage bias supply must not induce switching noise into the system. AMI offers a line of High Voltage Power Supplies for photodetector…
Posted in Sensors and Amplifiers, Technical Note
New High Performance Hybrid Eyesafe Laser Rangefinder Receiver
Analog Modules, Inc. announces the release of its High Performance Hybrid Eyesafe Laser Rangefinder Receiver Longwood, FL – June 4, 2020. Analog Modules, Inc. is pleased to announce the release of its High-Performance Hybrid Eyesafe Laser Rangefinder Receiver, Model 758B.1.…
Posted in General News, Sensors and Amplifiers
HIGH PERFORMANCE LASER RANGEFINDER RECEIVER WITH RANGE PROCESSOR
Model 7558A Laser Rangefinder Receiver with Range Processor The 7558A Series Rangefinder Receiver with Range Processor assembly comprises a high performance Model 758A receiver with compact support electronics to provide correct range data to a mother system. The serial range…
Posted in Sensors and Amplifiers, Technical Note
BiOS and Photonics West 2020 Wrap Up
BiOS and Photonics West 2020 Thank you to everyone who came by AMI’s booths in San Francisco. It was great to see long time friends and customers as well as making new connections. …
Visit AMI at BiOS and Photonics West 2020
A new year brings a new show season to AMI with upcoming exhibits in San Francisco, Shanghai, Anaheim, CA and a return to CLEO in San Jose, CA. First up is BiOS February 1 – 2 at the Moscone Center…
1 MV/A Transimpedance Amplifier
Model 312B Current Amplifier Application Note AMI’s Model 312B is a low noise high gain (1MV/A) transimpedance amplifier. It is designed to amplify small current signals, typically produced by a photodiode, to a voltage signal employing AMI’s proprietary compensation scheme…
Posted in Sensors and Amplifiers, Technical Note
HIGH SENSITIVITY APD OPTICAL RECEIVER APPLICATION NOTES
MODEL 7511A HIGH SENSITIVITY APD OPTICAL RECEIVER APPLICATION NOTE INTRODUCTION The Model 7511A is a high gain, low noise optical receiver employing an avalanche photodiode (APD) with a nominal bandwidth of 35 MHz and high dynamic range capable of driving a…
Posted in Sensors and Amplifiers, Technical Note
Model 755A-04.1
Hybrid eyesafe laser rangefinder receiver is designed for laser rangefinding & surveying equipment. Compact construction is ideal for miniature applications. Fast recovery from T0 overload allows ranging to close objects without compromising long range performance. The incorporation of an InGaAs APD gives very high sensitivity with time programmed gain to minimize false targets. Operation at both 1.06 µm and 1.54 µm is possible over a wide range of pulse widths.
